|
|
|
Medium and Large Insert Baseboard Levellers, 10mm
Designed to fit into a 11mm diameter hole drilled into the end of the train set baseboard leg, which should be at least 40mm square. With a sturdy 10mm screw, up to 25mm of adjustment is possible. The head has a nylon cap to protect the floor, it both rotates & also swivels by about 5 degrees. A nut is included to provide spanner flats for easy adjustment. This nut will need to be secured to the screw, perhaps with epoxy adhesive.
| Code |
Screw
Length |
Maximum
Adjustment |
Required
Hole Depth |
| FAA102 |
60mm |
25mm |
55mm |
|
| FAA103 |
80mm |
45mm |
75mm |
|
|
|
|
