Medium Bracket Mounted, Baseboard Height Adjuster

Available in two screw lengths.

A sturdy 3mm zinc plated bracket with a 10mm diameter screw. The head has a nylon cap to protect the floor, this head both rotates & swivels by about 5 degrees with a screwdriver slot in the top for adjustment. As an alternative means of adjustment, an additional nut is also provided, which if secured to the bottom of the screw (perhaps with thread lock or epoxy adhesive) would provide spanner flats, useful if the leg design limits access to the top of the baseboard adjuster. If used it would reduce the range by 8mm. Nut requires a 17mm spanner.

These height adjusters were designed to support furniture plinths, far heavier than any baseboard.