|
|
|
Roller
Plastic roller mounted in a steel cage. Ideal for supporting the outer edges of turntablesor traversers.
It will be necessary to provide a smooth bearing surface, idealy melamine, but chipboard, ply or MDF also work well.
These rollers can be mounted either way up. If recessed into one of the faces & the screw holes are countersunk, a clearance of as little as 1,5mm can be achieved. If no countersink is available the tip of a drill bit can be used.
For centre bearings for turntables or sector plates see my other listings.
|
|
|
